Industrial Valves

Product Details:

Leader valve, a pioneer in Valve industries, offers a wide range of Industrial Valves including G.M. & G.I. Gate, Globe, Check Valves (ISI/Non-ISI), Boiler Mountings viz. Junction Stop Valve, Safety Valve, PRV, NRV, Globe, Blow down, Strainers, Feed Check Valves, Steam Traps, Water Level Gauge, Injector, etc. with IBR T.C. and C.C.S./F.C.S. High Pressure & High Temperature Gate, Globe & Check Valves with IBR T.C.

 

They are available in size ranging from 6mm to 750mm and pressure rating to ASA Class-150, 300, 600, 800, BS-10 Table F, H, J, DIN STD ND-16, 40 with screwed, socket weld & flanged connections. Leader is one of the very few Valve manufacturers in the world, manufacturing widest range of Valves, Cocks & Boiler Mountings in different material of constructions with completely indigenous technology developed by leader itself through extensive research, strict quality control and continuous development.

From raw castings to finished product, every component is manufactured in Leader''s own factory under its stringent quality control. Leader has its own fully equipped foundries for G.M., C.I., C.S. & Forging Shop for Forged Steel Valves.

Additional Information:

• Delivery Time: Ready Stock

Product Details:

We offer Safety Relief Valve that are widely used in different industries and are available in different sizes and shapes. Following are the features of these valves:

Specifications:

• Easy installation
• Resistant to corrosion
• Durable
• Higher capacity

Additional Information:

• Delivery Time: Ready Stock

Product Details:

Non Return Valves provide a long service life and leak tightness of high order. They are double Flanged in design with a rigid and sturdy built. Reflux valves are used in pipelines to reduce water hammer and to prevent back flow of water to the pumps from rising mains. These valves are suitable for handling water having a turbidity of 3000 ppm within the limits of the pressure rating and for a temperature of upto 50 Deg C. Their size range varies from 50mm to 1200mm both in Cast Iron as well as Cast Steel .

Additional Information:

• Delivery Time: Ready Stock

Product Details:

Our organization is engaged in the manufacturing of quality Angle type Globe Valves. The Globe Valve ensures that the direction of flow is in one direction while Angle Valve ensures that the direction of flow of liquid is any direction. Our range of product is in high demand as these are:

• Leak resistant

• Pressure tightness

• Long packing life

• Dimensionally accuracte

 

Manufacturing std – BS 1873

Testing & Inspection Std. – API 598/ BS 5146

Face to Face : - ANSI B 16.10

End Connections: - ANSI B 16.5

Shell wall thickness :- ANSI B 16.34

 

 

 

Additional Information:

• Delivery Time: Ready Stock

Product Details:

Founded in the year 2001, MMK Engineering Co. Pvt. Ltd is one of the famous names in the market. The ownership type of our company is a sole proprietorship. The head office of our business is located in Mumbai, Maharashtra. Enriched by our vast industrial experience in this business, we are involved in trading an enormous quality range of Ball Valves, Plug Valves, Gate Valves, Globe Valves and many more. Our quality integrated range is the output of the combination of the hard work of our hard-working manpower and the contemporary techniques that we own as our pride. Owing to his passionate efforts, detailed information in this sphere and huge industrial knowledge, we have been able to stand to the views of our customers. For providing better quality we ensure that products are manufactured according to the set standards. Each product is supervised under quality control cells to rectify errors. If the products do not adhere to the quality standards they are removed from production line.

Additional Information:

• Packaging Details: Product Description A well-designed steam system will produce clean dry steam in the boiler house ready for delivery at high pressure through the distribution network. This maximizes the potential to generate and supply saturated steam of the best quality at the lowest overall cost. Additional Information Port Of Dispatch Mumbai/ Maharashtra Payment Terms L/C (Letter of Credit)/T/T (Bank Transfer)/D/P

Product Details:

Our organization is engaged in trading and supplying a wide range of Pressure Reducing Valves. These valves have the maximum working condition of 26 kg/cm² at 300°C and body design conditions 42 kg/cm² at 427°C. Moreover, these have the cold hydraulic test pressure of 52 kg/cm² without internals. Customers can avail these products at market leading prices. Following is the range of products offered by us:

Downstream pressure spring ranges:

Yellow: 0.2 to 3 kg/cm²

Blue: 2.5 to 7 kg/cm²

Red: 6.0 to 17.3 kg/cm²

Grey: 16.3 to 24.4 kg/cm²

Sizes: NB 15 LC, 15, 20, 25, 40, 50 and 80

Additional Information:

• Delivery Time: Ready Stock

Product Details:

Leader Valves:

We offer complete range of valves for Petrochemical, Chemical, Industrial, Marine & Infrastructure Industry. We also develop special valves for critical applications as per the customers requirement. Our Product range includes:

Ferrous / Non – Ferrous Gate / Sluice / Globe / Check/ Reflux /Butterfly/ Ball & Plug Valves from 6mm to 900mm in Cast & Forging for pressure ratings from Class-125 to 2500. We also manufacture "Fire-Safe" Gate, Check & Ball Valves.

We also manufacture Boiler Mountings i.e. Pilot Operated Pressure Reducing Valves, Safety Valves Single/Double Post Safety Valves/Steam Stop Valves, Injectors Steam Traps, safety Relief Valves, Non-return Valves etc. in Ferrous/Non-ferrous materials from 15mm to 200mm etc.

Specifications:

Cast Steel Gate Valves:

Cast Steel Check Valves

Bronze/ Steel Cryogenic Valves

CS/FS Ball Valves

GM/CI Venturi Port Ball Valves

Forged Steel Gate/Globe/Check Valves

Cast Iron Globe Valves

CI/CS Gland less Piston Valves

Gun Metal Gate Valves

Gun Metal Check Valves

Gun Metal/Brass: Ferrule Cock

Gun Metal Plug Valves

Globe Steam Stop Valve

Bronze /CI Sight Glasses

Gun Metal/CI Float Valves

Hi-Lift Safety Valve/Relief valves

Pressure Reducing Valve

Stop and Non-Return Valve

Water Level Gauges

Fusible Plugs, Injectors & Ejector

Cast Steel Globe Valves:

Cast Iron Air Release Valves

CI/CS/ Gm Butterfly Valves

Gun Metal/ Brass/ CI Ball Valves

GM/CI/CS Wafer Type Check Valves

Cast Iron Gate Valves

Cast Iron Check Valves

CI/CS/ Bronze Strainers

Gun Metal Globe Valves

GM /Brass: Bib Cock & Stop Cock

GM / Pressure Reducing Valves

CI/CS/ Lubricated Plug Valves

Bronze Safety Valves

Gun Metal/CI Foot Valves

Bronze Safety Valve

Pilot Operated Pressure Reducing Valve

Non Return Valve

Accessible Feed Check Valve

Parallel Slide and Blow of Valves

Steam Traps & Moisture Separator

Additional Information:

• Delivery Time: Ready Stock
• Packaging Details: Audco Globe Valve offered features superior construction standards and finds use in different areas like power sector and others. These valves come with ASME ¿¿¿N¿¿¿ and ¿¿¿NPT¿¿¿ stamping as well as in other industry standards as demanded by the customers. Some of its features include availability in ¿¿¿¿¿ to 2¿¿¿ in straight pattern and Y-pattern choices, available in different ASME classes as per the patterns, precision construction standards, availability in different construction material choices and others. Our range of globe valve body is comparatively bigger in size and is used to handle more pressure. We have been appreciated by our clients for its features such as dimensional accuracy, precise functioning and durable. Our quality assistants check these globe valve body on well-defined parameters to ensure that these are at par with industrial quality standards.

Product Details:

We are engaged in offering a quality range of Steel Forged Valves to our esteemed customers to meet their varied industrial requirements in the best possible manner. These products are available in varied specifications to meet the requirements of different industries and sectors. We also make sure to deliver these products at the customers'' end within the postulated time period.
 
Specifications:
 

Optimum performance

Corrosion resistance

High tensile strength.

 

Additional Information:

• Delivery Time: Ready Stock

Product Details:

We are one of the most affluent importers of automatic valves. The range of valves that we deal in includes products manufactured by the companies like MMKE .The types of valves that we deal in include ball valves, butterfly valves, NRV, gate valves, compressor valves etc. All the valves available with us are of the superior quality manufactured form the finest quality raw material. In addition to it, these valves have really long life. These features have contributed in our success as the foremost valves suppliers of India.
Other Information:
Pay Mode Terms: D/P (Documents Against Payment), (Bank Transfer)

Additional Information:

• Packaging Details: Product Details: Item No. Components Material 1 Bolt Carbon Steel 2 Bush Teflon / Nylon 3 Disc S.g. Iron / Stainless Steel 4 Liner* Nitrile / Epdm 5 Bush Teflon / Nylon 6 Circlip Spring Steel 7 Body Cast Iron 8 Lock Plate Carbon Steel 9 Bolts Carbon Steel 10 Adjusting Lever Carbon Steel 11 Lock Hole - 12 Upper Stem Stainless Steel 13 Lower Stem Stainless Steel

Product Details:

We are one of the leading organization engaged in providing excellent quality Forged Steel Valves, which are manufactured by using high grade material.

Additional Information:

• Delivery Time: Ready Stock

Product Details:

These valves have a rigid and sturdy design with a minimum pressure loss across the line. They are available in both rising as well as non rising types in a large number of sizes ranging from 40mm (1.1/2”) to 1300mm (52”). They find a major application in industries such as Waste Water Treatment plant, Effluent & Sewage Treatment Plants, Sugar Industry, Paper & Pulp Industry and Various other water works.

Additional Information:

• Item Code: Good
• Delivery Time: Ready Stock
• Packaging Details: Applications: Clearwater having turbidity up to 5000 ppm and temperature up to 45¿¿ C. Valves can also be supplied up to 180¿¿ C working temperatures with special design, subject to working pressure limitations

Product Details:

he MMK Engineering Company Pvt. Ltd. globe valves offered by us are are fabricated using qualitative raw material. In conformation with various industrial standards, these valves provide an unremitting flow path. Available in various technical specifications, these globe valves are also capable of offering throttling operations.

 

Construction:

Full port or Conventional Port
Outside Screw and Yode (OS&Y)
Two piece self-aligning packing gland
Botted bonnet with spiral wound gasket, threaded
and seal welded bonnet or threaded and pressure seal bonnet
Integral backseat
Socket weld Ends to ANSI B16.11
Screwed Ends(NPT) to ANSI/ASME B1.20.1

Forged Steel Globe Valves:

Size: 1/4"-2"(8-50mm)
Type: Threaded, Socket Weld & Flanged
Standard: ASME Class 800, 1500, 2500
Flanged ASME Classes 150, 300, 600, 1500

Additional Information:

• Delivery Time: Ready Stock

Product Details:

Reflecting excellence, our range of Wafer-type Designed ValvesSlimseal and Aquaseal Valves has gained huge market share for itself. During the manufacturing of these valves the elastomer liners are directly molded on to the body and vulcanizing in-situ. Further, these integrally molded liners are known for their long lasting life and least maintenance requirement. The Slimseal and Aquaseal range offered by us is known as fit-and-forget valves, which is specifically designed to outperform valves with loose liners.

 

Materials of Construction:

 

• Slimseal - BS1452 Gr.250, BS2789 Gr.420/12, WCB, BS1400 AB2, CF8, CF8M, other materials available on demand.
• Aquaseal - BS1452 Gr.200

 

Features:

 

• Longer life
• Bubble-tight sealing
• Low torque
• Assured sealing to atmosphere
• Easy installation 

Additional Information:

• Delivery Time: Ready Stock

Product Details:

Specifications flanged ends to din 2533 np- l6rf upto 150mm straight pattern, outside screw, yoke type, rising spindle.renewable i 3% cr. Stainless steel (aisl~4 10) working parts.provision of re-packing under pressure.minimum pressure drop inside the body clue to streamlined body highish lilt at the seat to avoid obstructions in the flow.

Additional Information:

• Production Capacity: 150#,300#,600#, 800#, 900#, 1500#, 2500#
• Delivery Time: Ready Stock

Product Details:

We offer a wide range of Blue Down Valve that is manufactured from quality raw material and have diverse application area. These valves are designed as per client requirements and have the following essential features:

Specifications:

Durable

Resistant to corrosion

Easy installation

Additional Information:

• Delivery Time: 1 Weeks
• Packaging Details: Good

Product Details:

Additional Information:

• Delivery Time: Ready Stock
• Packaging Details: Additional Information: Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A

Product Details:

Specifications:

Spirax Piston Valve

• MOC: ASTM A 105
• Sizes: 15 to 50 NB
• Ends: Scr. BSPT/NPT/SW
• PMA: SW 78.0 Kg/cm²(g), Scr. 31.6 Kg/cm²(g)
• TMA: 427º C

Additional Information:

• Delivery Time: Ready Stock
• Packaging Details: We hold specialization in offering a broad array of Spirax Piston Valve Flanged ANSI 150 / 300 to the patrons. these products are obtained from trusted manufacturers, who use premium quality raw material in the production process. our customers can avail these products in varied specifications in the market. further, we check all the products on several parameters before final shipment.

Product Details:

We hold specialization in offering a broad array of Piston Valve to the patrons. These products are obtained from trusted manufacturers, who use premium quality raw material in the production process. Our customers can avail these products in varied specifications in the market. Further, we check all the products on several parameters before final shipment.

Specifications:

• MOC: ASTM 216 Gr .WCB
• Sizes: 1/2'' to 8'' NB
• Ends: Flgd # 150, # 300
• PMA: # 150 – 19.6 Kg/cm²(g), # 300 – 51.0 Kg/cm²(g)
• TMA: 427º C

Additional Information:

• Delivery Time: Ready Stock

Product Details:

Ail slim seal butterfly valves is a wafer type butterfly valve with an integrally molded elastomer body liner. Designed to outperform loose liners, slim seal's elastomer liner is molded directly in the body bore & vulcanized in situ, making it last the entire life of the valve.

Additional Information:

• Delivery Time: Ready Stock

Product Details:

Item Code: DP-143 / 17/ 13/ 23
Spirax Pressure Reducing Valve
Specifications:
MOC: CI 15 to 25, DP 13 / 17
MOC: CS, A 216 Gr. WCB
Sizes: 15 to 50, 80 NB
Ends: Flgd. to BS 10 Table J and K, ANSI-300 and 600
PMA: 42.0 Kg/cm²(g)
TMA: 427º C

Pressure Reducing Valves
backed by our industrial expertise, we are able to come forth with the finest quality Spirax Pressure Reducing Valve which can be availed at the most comprehensive range of price. these products are seamlessly designed to ensure their ability to withstand in every type of severe conditions. apart from this, the entire product-line is widely used demanded and appreciated by the large number of patrons due to their high efficiency and long lasting service life.

Additional Information:

• Packaging Details: We are one of the trusted names in the market to offer a highly durable range of SPIRAX Marshall Pressure Reducing Valve (PRV DP143). Automatically reduces a higher inlet pressure to a constant lower outlet pressure. The regulator will reduce the upstream pressure to a constant downstream pressure regardless of the change in flow rates/or inlet pressure.

Product Details:

We Mfg. distribute a wide variety of valves that are exclusively demanded and used in the industry. These valves are use to regulate the flow of fluid, liquid, gas, liquidized solid and slurries in industrial pipes. Due to their high usage and demand in the industry, these valves are manufactured from fine stainless steel and other raw materials.

Additional Information:

• Production Capacity: #150, #300, #600, #800, #900, #1500, #2500
• Delivery Time: Ready Stock

Product Details:

Product Specification Brand MMKE MaterialStainless SteelValve Size1/2' - 2'PressureMediumEnd ConnectionScrewed, SW, BW.,Uses/ ApplicationWater, Chemical, Oil Etc

Additional Information:

• Production Capacity: 15 NB to 50 NB
• Delivery Time: Ready Stock

Product Details:

Product DescriptionMMKE Series  Ball valves are single piece flanged ball valves. Antistatic and fire safe, these valves have excelled in the industry by finding themselves on some of the most arduous applications.

- Catalogue no : L1RF1C / L1RF3C / L1FF1C / L1FF3C
- Material : Carbon Steel

- Catalogue no : L1RF1S/ L1RF3S / L1FF1S / L1FF3S
- Material : Stainless Steel

- Size range : 1/2" - 8"
- Pressure rating : Class 150/300
- End connection : Flanged

Additional Information:

• Production Capacity: #600, #800, #900, #150, #300, #600, #1500, #2500,
• Delivery Time: Ready Stock

Product Details:

Uni klinger piston valve

UKL Piston Valve is basically Seat less and Glandless valve and by virtue of its design can replace both, the conventional type of Gate and Globe valves, with distinct advantages over them. The Klinger Piston valve works on the principle of Resilient rings in conjunction with a Metallic Stainless Steel Piston, that moves vertically between the rings, giving a Seal that is both effective as well as Durable. This sealing system gives a bubble tight shut off, equivalent if not superior to Class VI leak standards.The Sealing rings are the heart of the valves, are available in Non Asbestos, Tanged Graphite, and Graphited Asbestos varieties, to effectively handle more than 250 Industrial Media.

UKL piston valves are ideally recommended for critical and hazardous media, including Steam, Heat Transfer Oils, Acids, Gases, VACUUM.

Manufactured in Forged Carbon Steel / Stainless Steels to 800# – Sizes 15mm to 40mm, in SW and Threaded Ends. Cast Carbon Steel / Stainless Steels with Flanges to 150#, #300 & DIN standards 50 to 200mm.

  Salient Features:

Economic, easy to serviceAbsolutely leak-tight across the ports and to the atmosphereNo erosion of sealing surfaceSaves energy and does not contaminate the environmentMaintenance free

UKL Piston valves can be provided with additional feature like:

Regulating Piston/Lantern Bush; for coarse regulating/Throttling operationExtended Spindle: For Cryogenic application/Hot media to prevent heat transfer to H/W and aid handling of valveHeating Jacket: For Media that tends to solidify/crystallize at low temperature and needs constant heating by either steam/Thermic oils circulated through the Jacket.Pneumatic, Hydraulic or Electrical Actuator: For remote operating of the Valves

Product Details:

Wafer Check Valve
Wafer Check Valve Wafer Design Plate Type Check Valve has short face-to-face dimensions and low weight allows a simple space saving installation between the companion flanges. The valves are suitable to mounting between weld neck or slip on type companion flanges of different standards.They are specially developed for applications where a low-pressure loss is essential. Opening and closing of the valve will take place at an extremely low-pressure difference over the valve disc. The eccentric disc shaft combination with the disc seat guarantees a positive shut off returning media. Wafer check valves are becoming the preferred type of check valve for most applications, due to their compact design and relatively low cost.

Features :

Body Type: Single Plate, Short Type

Suitable For Horizontal and Vertical Mounting

Shorter overall length, mounting requires minimum space

Low Pressure Drop Easy to Install

Less Weight

Maintenance Free

Seat Leakage: Zero Leakage

Tight Shut Off

Temperature Range: -250 To 2000 C

Standards :

Design Standard API 6D

Inspection & Testing Standard API 6D

Face To Face As Per ANSI B 16.10

End Connection Wafer Type

Flange less

Suitable to Mount Between Two Flanges

Size Range 1" To 24"

Pressure Rating PN 16

Product Details:

We are one of the trusted names in the market to offer a highly durable range of SPIRAX Marshall Pressure Reducing Valve (PRV DP143). Automatically reduces a higher inlet pressure to a constant lower outlet pressure. The regulator will reduce the upstream pressure to a constant downstream pressure regardless of the change in flow rates/or inlet pressure.

Features:

Limiting Conditions: Maximum Working Condition 26 kg / cm2 at 300° C. Body design Conditions: 42 kg / cm2 at 427° C.Cold Hydraulic test pressure without internals: 52 kg/cm2
Three colour coded pressure adjustment springs are available for the following downstream pressure ranges:Yellow :02 to 3 barBlue :2.5 to 7 barRed :6.0 to 17.3 barGrey :16.0 to 24.4 bar
Sizes: NB 15,20, 25,40, 50 and 80.Std. Accessories: Pr. Gauge, syphon Gauge cock Pipe Connections:Flanged to -BS10 table - 'J' * 'K' ANSI - 300' * '600' DIN - ND - '25' * '40'*Note - 80 NB has these flanges only.
How to order ?1) 20 NB SPIRAX MARSHALL DP -143FOR STEAM FLANGED TO BS 10 TABLE 'K' IBR(OR NIBR).
2) 40 NB SPIRAX MARSHALL DP 143 FOR AIR FLANGED TO ANSI 300 NIBR. Pressure Reducing Valve DP 143

Additional Information:

Item Code: DP143

Additional Information:

• Packaging Details: We are among the trustworthy and famous organization of this domain, engaged in manufacturing, Supplying and exporting a quality approved assortment of Leader valves, Audco Valves, and Spirax Steam Traps. Additional Information: Item Code: DP-143

Product Details:

Established in 2001, we, MMK Engineering Company Pvt. Ltd are a proprietorship firm that is proficient in the supplying, wholesaling and trading of an ample range of Industrial Valves, Strainers, Pipes & Pipe Fittings. The extensive range of products offered by us is inclusive of Ball Valves, Check Valves and Non Return Valves. Known for their anti-corrosive properties, easy installation and long lasting life, the whole range of the products offered by us has amassed words of intense praise among our client-base spread across the nation. Owing to the quality of the products we offer, we have secured a prominent position in the market.
Manufactured using high-grade metals and alloys at the vendor’s end, we assure a range of utmost quality products for the client-base we have accomplished to reap so far. Attributing to the quality of the products we offer, these have been the preferred choice of our clients. Committed to the satisfaction of our clients, we further check the whole range of the products offered on various parameters and hence a range of invincible quality products.

Product Details:

We are among the trustworthy and famous organization of this domain, engaged in manufacturing, Supplying and exporting a quality approved assortment of Leader valves, MMKE Valves, and Spirax Steam Traps. 

Additional Information:

• Item Code: DP-143

Additional Information:

• Packaging Details: We are among the trustworthy and famous organization of this domain, engaged in manufacturing, Supplying and exporting a quality approved assortment of Leader valves, Audco Valves, and Spirax Steam Traps. Additional Information: Item Code: DP-143

Product Details:

We hold specialization in offering a broad array of Spirax Pressure Reducing Valve to the patrons. these products are obtained from trusted manufacturers, who use premium quality raw material in the production process.

Additional Information:

Item Code: BRV-2

Additional Information:

• Packaging Details: We hold specialization in offering a broad array of Spirax Pressure Reducing Valve to the patrons. these products are obtained from trusted manufacturers, who use premium quality raw material in the production process. Additional Information: Item Code: BRV-2

Product Details:

We are highly acknowledged business entity involved in providing Blue Down Valve. These products are extensively demanded for their optimality and durability as these products are manufactured using quality-approved raw material. Apart from this our offered range is widely appreciated by the large number of industrial clients.

Features:
Seamless finish
Long lasting performance
Optimality
Easy to install
Properly examined
High-grade material
Corrosion-resistance
Blue Down Valve

Additional Information:

• Packaging Details: We are highly acknowledged business entity involved in providing Blue Down Valve. These products are extensively demanded for their optimality and durability as these products are manufactured using quality-approved raw material. Apart from this our offered range is widely appreciated by the large number of industrial clients. Features: Seamless finish Long lasting performance Optimality Easy to install Properly examined High-grade material Corrosion-resistance Blue Down Valve

Product Details:

Established in the year 2001 at Mumbai , Maharashtra, we “MMK Engineering Company Pvt. Ltd" are a Partnership firm, engaged as the foremost Manufactrurer and Trader of Butterfly Valves, Steam Traps, Ball Valves, etc. Our products are high in demand due to their premium quality and affordable prices. Furthermore, we ensure to timely deliver these products to our clients, through this we have gained a huge clients base in the market.

Additional Information:

• Packaging Details: Established in the year 2001 at Mumbai , Maharashtra, we ¿¿¿MMK Engineering Company Pvt. Ltd." are a Partnership firm, engaged as the foremost Manufactrurer and Trader of Butterfly Valves, Steam Traps, Ball Valves, etc. Our products are high in demand due to their premium quality and affordable prices. Furthermore, we ensure to timely deliver these products to our clients, through this we have gained a huge clients base in the market.

Product Details:

MMKE, High-Pressure Gate Valves are manufactured to the latest International designs, using the latest, State of the Art technology and a strict quality control system. These valves are exceptionally Sturdy, Rugged and Durable. They are designed for a tight Seal, ease of operation with inbuilt Quality and Integrity for a long service life, High-Pressure Valves are manufactured in Gate as well as Globe valve types. Gate valves - probably the most common valves in use today, esp.where an uninterrupted flow is required, because the gate fully retracts into the bonnet, creating a minimal pressure drop, when the valve is in an open position. Gate valves are specifically intended for use in isolation applications.
 
Globe valves -the main advantage is that a globe valve opens more rapidly than a gate valve as the disc only needs to move a small distance from its seat to allow full flow. This is an advantage when there is the frequent operation of the valve.
 
The disadvantage is that the fluid has to change course, increasing the resistance to flow and generating turbulence. This results in a higher pressure drop across a globe valve than a gate valve. Globe valves are designed to close off, open up or throttle the flow in a pipeline.
 
The Pressure Seal Bonnet:
Another very effective type of Bonnet construction apart from the standard Bolted Bonnet type in a gate/Globe valve is the Pressure, Seal Bonnet. This construction is adopted for valves for high to very high-pressure service. The unique feature about the pressure seal bonnet is that the Body - Bonnet joints seal improves as the internal pressure in the valve increases, compared to other constructions where the increase in internal pressure tends to create leaks in the body-bonnet joint.
 
Applications:

Power Stations, Thermal & Cogeneration Power Plants, Nuclear Power Plants, Petrochemical, Chemical, Process and other General Industries, Sugar, Refineries, Fertilizers, Steel, Off-Shore &On-Shore Platforms.

Media of applications include Water, Steam [Saturated / Superheated] Oil and Gas, Hydrocarbons, NACE and Sour Services, LNG & Natural Gas, Oxygen and Hydrogen Services and many other Aggressive and Non-Aggressive applications.

 
Range: UNI KLINGER UKL High Pressure
Gate and Globe Valves Sizes: 15mm [0.5] to 250mm[10]
End Connections: 15mm to 40mm - Forged Steel, Welded Bonnet, SW / BW Ends 50mm to 250mm Cast Alloy Steels - straight type BWE
As per ASME B16.34: Pressure Classes 1500 and 2500.
Materials. ( as per ASME B-16.34 ) # 1500 , # 2500 in A-216 WCB for temperature 0o C to 425deg. C # 1500 , # 2500 in A-217 WC-6 / WC-9 for temperature 00 C to 593deg. C Other material on request
 
Features:

Pressure Seal Bonnet Design.

Stellite Hard faced Seat and Disc

Direct Retro-fitted Actuator / Gear Box arrangement as applicable

Graphite Seal rings and Packings.

All valves up to 40mm are Outside Screw and Yoke, Welded Bonnet type, rising stem renewable seat, for Gate valves. Globe valves will have Integral seat. All valves 50mm and above are Outside screw and Yoke, Rising Stem and with Pressure Seal Bonnet.Gate Valves shall be with Flexible wedge type Gate. Globe Valves shall have Conical type Disc.

 
UNI KLINGER UKL High-Pressure Gate and Globe Valve
klinger valvesklinger valves klinger valves klinger valves klinger valves klinger valves klinger valves klinger valves klinger valves

Product Details:

Uni klinger piston valve

UKL Piston Valve is basically Seat less and Glandless valve and by virtue of its design can replace both, the conventional type of Gate and Globe valves, with distinct advantages over them. The Klinger Piston valve works on the principle of Resilient rings in conjunction with a Metallic Stainless Steel Piston, that moves vertically between the rings, giving a Seal that is both effective as well as Durable. This sealing system gives a bubble tight shut off, equivalent if not superior to Class VI leak standards.The Sealing rings are the heart of the valves, are available in Non Asbestos, Tanged Graphite, and Graphited Asbestos varieties, to effectively handle more than 250 Industrial Media.

UKL piston valves are ideally recommended for critical and hazardous media, including Steam, Heat Transfer Oils, Acids, Gases, VACUUM.

Manufactured in Forged Carbon Steel / Stainless Steels to 800# – Sizes 15mm to 40mm, in SW and Threaded Ends. Cast Carbon Steel / Stainless Steels with Flanges to 150#, #300 & DIN standards 50 to 200mm.

  Salient Features:

Economic, easy to serviceAbsolutely leak-tight across the ports and to the atmosphereNo erosion of sealing surfaceSaves energy and does not contaminate the environmentMaintenance free

UKL Piston valves can be provided with additional feature like:

Regulating Piston/Lantern Bush; for coarse regulating/Throttling operationExtended Spindle: For Cryogenic application/Hot media to prevent heat transfer to H/W and aid handling of valveHeating Jacket: For Media that tends to solidify/crystallize at low temperature and needs constant heating by either steam/Thermic oils circulated through the Jacket.Pneumatic, Hydraulic or Electrical Actuator: For remote operating of the Valves

Product Details:

These Safety Valve and flame arrestors are used in industries for proper control of gas flow and for offering safety against fire eruption. We have also fitted safety relief valves in vessels, which helps in preventing an undue rise in pressure. These valves are offered with customized solutions so as to cater to the wider specifications of our clients.

Additional Information:

• Packaging Details: We are among the trustworthy and famous organization of this domain, engaged in manufacturing, Supplying and exporting a quality approved assortment of Leader valves, Audco Valves, and Spirax Steam Traps.

Product Details:

Plug Valve Regular Pattern, Standard Type Wrench Operated Valve.

Specification:

• Class 125 flange dimensions and drilling in accordance with ANSI B 16.1 BSPT "D" AND "F" flange dimensions and drilling in accordance with BS10.
• These valves have a port area substantially equal to the bore of pipe where full area is not essential economies can be made by the use of short pattern valves having reduced area.

Additional Information:

• Delivery Time: Ready Stock

Product Details:

We specialize in providing an excellent gamut of Plug Valve to large industrial applications so as to control pressure and prevent back flow. Our valves are provided in diverse sizes and specifications, which enable us to satisfy the needs of the clients. We also offer high quality globe plug valves to suit the necessities of our customers.

Additional Information:

• Packaging Details: We are one of the most prominent manufacturers and supplier of Cast Iron Plug Valve. We have hired experienced professionals who manufacture these high quality tanks by utilizing optimum quality raw material, procured from the most reliable vendors of the industry. Products we offer are used to to provide flexibility to the glands and offer leak-free, easy turning performance. Furthermore, to ensure that our customers are provided with high quality valves, we use high-grade cast iron in the manufacturing process of these valves. Salient Features: Long lasting performance Plug valve designed with heavy wall body Designed to provide maximum rated working pressure Valves capability to withstand higher-than-line sealant pressure as well as line stresses as experienced in extreme situation

Product Details:

Our company is involved in manufacturing and supplying of Angle Type Safety Valve. Safety valves are generally used in various Pressure systems to control flow of gas or liquid. These valves automatically release liquid or gas when the temperature or pressure within the vessel or pipeline exceeds the permissible limits.
Available In Material – WCB, LCB, WC6, CF8, CF8M, CF3, CF3M, Gun Metal
Available Sizes – 1” X 2”, 1.5” X 2.5”, 2” X 3” or as per customer's requirement.

 

Additional Information:

• Delivery Time: Ready Stock
• Packaging Details: We are among the trustworthy and famous organization of this domain, engaged in manufacturing, Supplying and exporting a quality approved assortment of Leader valves, Audco Valves, and Spirax Steam Traps.

Product Details:

MMKE Lubricated Taper Plug Valve has been successfully used in a variety of services because of its unique in-line maintenance capability. The AUDCO Taper Plug Valves are manufactured in sizes 1/2" to 12" and used in a variety of liquid, gaseous and slurry services. The tapered seating surfaces of the Body and Plug are not exposed to the line fluid when the valve is in the open position, so that the erosion and corrosion of the media are confied to the lesser important part of the Valve. The 'Super LoMu' Plug coating and the patented sealant provide low friction, low torque and easier operation of the Valve

Additional Information:

• Delivery Time: Ready Stock
• Packaging Details: We are one of the most prominent manufacturers and supplier of Cast Iron Plug Valve. We have hired experienced professionals who manufacture these high quality tanks by utilizing optimum quality raw material, procured from the most reliable vendors of the industry. Products we offer are used to to provide flexibility to the glands and offer leak-free, easy turning performance. Furthermore, to ensure that our customers are provided with high quality valves, we use high-grade cast iron in the manufacturing process of these valves. Salient Features: Long lasting performance Plug valve designed with heavy wall body Designed to provide maximum rated working pressure Valves capability to withstand higher-than-line sealant pressure as well as line stresses as experienced in extreme situation

Product Details:

In order to meet the variegated demands and requirements of the clients, we present a precisely engineered array of Pressure Balanced Range Valves. The range is fabricated incorporating the new generation pressure-balancing system and on-line maintenance feature, which enhances its reliability and reduces operating torque. Further, to confine the corrosion and erosion to less critical areas, these are designed as such that the plug and body seating surfaces, which are lapped and matched together, does not get exposed to the line fluid. Furthermore, a specifically developed plug sealants is charged around the seating surfaces to enhance the sealing.

 

Features:

 

• Pressure Balancing
• Double Block-and-Bleed
• Certainty of operation - Freedom from seizure
• Bubble-tight sealing
• Assured sealing to atmosphere
• Fire-safe
• Maintainable online

Additional Information:

• Delivery Time: Ready Stock

Product Details:

We would like to introduce our clients with an extensive assortment of 3 way pneumatic control valves that is highly demanded by our clients all across the world. These valves find numerous applications in various sectors of different industries like chemicals, fertiliser, steel & aluminium and sugar.

 

 

Additional Information:

• Delivery Time: 1 Week